Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I ...

In addition to the 3.5 mm auxiliary port and the USB-C charging port, the ML300 has a switch to move between transmitter and receiver modes or to turn off the device, a multifunction button for ...

Fms Rc Planes for Adults Remote Control RTF Airplane 800mm F4U Corsair V2 Blue Without Reflex 4 Channel RTF Rc Airplanes Ready to Fly (Including Transmitter,Receiver,Charger) Fms 77 ratings ...

Learn what dual rates are, how they are used, and how to program them on your Spektrum DX6i transmitter. This simple setting will make a world of difference whether you are a new pilot learning to fly ...

Learn the essential steps to set up an RC airplane using a powerful and adaptable transmitter. This guide walks through binding, calibration, and programming to ensure smooth and precise control.

433Mhz Receiver Module. This receiver also very tiny and comes with 4 pins VCC, ground, and the two middle pins are data out. The working voltage of this module is 5v. Like the transmitter module, ...

More than 10,000 Amazon shoppers have purchased the audio transmitter this month and it’s even earned a No. 1 bestseller title for wireless audio receivers and adapters. Keep reading to learn ...

On your journey in building your first RC transmitter and receiver, you may encounter some issues along the way when putting one together, so among the key takeaways below, you may find some useful ...

The St. Patrick’s Day crowd at Huntsville’s Back Forty Beer Company got a ‘slight scare,’ when the business says an RC airplane crashed onto its roof.

The MARS M1 Enhanced supports one transmitter and two receivers, or monitoring on up to four separate standard mobile phones or tablets, or one receiver alongside two monitoring mobile devices. It ...

RC-transceiver uses it's own Linux kernel module. This module uses the hardware PWM of Onion Omega2 for IR transmitting and GPIO for receiving. You can load the module via command line: insmod ...